Radio MMI Surround Trim Replacement Kit for Audi A6 S6 RS6 C6 - 2004 to 2011

The Frame Around Your Audi A6 C6 MMI Deserves to Look the Part

The MMI surround trim sits dead center in your Audi A6 C6's cabin. Every passenger sees it. Every time you reach for the controller, you touch it. And unlike rubber button coatings that fade gradually, a scratched or cracked MMI surround panel is impossible to ignore — one deep mark from a ring or key, and the entire center console looks neglected.

This Radio MMI Surround Trim Replacement Kit for Audi A6 S6 RS6 C6 (2004–2011) replaces the worn frame with a factory-spec piece, restoring the focal point of your interior in minutes.

Kit Contents & Specifications

Why the C6 MMI Surround Wears the Way It Does

The Audi A6 C6 MMI surround trim takes a different kind of abuse than the buttons around it. It's not rubber degradation — it's contact damage. Keys dropped on the console, rings catching the edge as you reach for the controller, grit from daily use working into the surface.

The factory piano black finish is particularly unforgiving: it shows micro-scratches from even light contact, and once the finish is compromised, there's no polishing it back. Replacement is the only clean solution — and with a clip-on fit, it takes less time than cleaning the old one.

Fits Every A6 C6 Variant — All Production Years

• Audi A6 C6 — all engines and trim levels, 2004 to 2011
• Audi S6 C6 — V10 5.2 FSI, 2006 to 2011
• Audi RS6 C6 — V10 twin-turbo, 2008 to 2010
• Compatible with both pre-facelift (2004–2008) and facelift (2009–2011) center console layouts

To confirm fitment: check that your center console has the round MMI rotary dial with surrounding buttons set into a raised surround panel. If so, this trim kit replaces that outer frame directly.

A Clean Install That Looks Factory

The replacement trim clips onto the existing console structure using the original mounting points — no adhesive, no drilling, no permanent alteration. The fit is flush and firm, with no gaps or movement once seated.

The OEM-matched finish blends naturally with the surrounding piano black and gloss elements of the C6 interior, so the repair is invisible. From scratch to done: under five minutes.

Complete the Look — Buttons and Trim Together

A fresh MMI surround next to worn, peeling buttons creates its own contrast problem. If you're replacing the trim, consider pairing it with our Audi A6 C6 AC and MMI button replacement kit for a complete console restoration in one order. Browse our full Audi C6 interior accessories collection to cover every detail.

Frequently Asked Questions

Is this the outer frame/bezel, or does it include the MMI buttons?

This kit covers the surround trim panel — the decorative frame that borders the MMI controller. It does not include the rotary knob or the surrounding push buttons. For buttons and knobs, see our separate Audi A6 C6 button replacement kit.

Does the finish match the rest of my C6 interior?

Yes. The trim is produced in the same piano black / gloss ABS used on the factory center console, matching the surrounding panels in sheen and texture.

Will it fit if I have the Audi RS6 C6 with a sport interior?

Yes. The RS6 C6 uses the same MMI center console layout as the A6 and S6 C6. The surround trim is identical across all three variants.

My trim isn't cracked — just heavily scratched. Is replacement still the right call?

On piano black surfaces, deep scratches cannot be buffed out without removing the surface finish entirely. Replacement is the only way to return the panel to a clean appearance. At clip-on fitment and no tools required, it's also the fastest option.

Can I revert to the original trim if needed?

Yes — the installation is fully reversible. The replacement clips on and off the same way as the original, with no adhesive or modification involved.