Multifunction Steering Wheel Replacement Buttons For Audi A4 S4 RS4 B9 - 2016 to 2024
Multifunction Steering Wheel Replacement Buttons For Audi A4 S4 RS4 B9 - 2016 to 2024 - Silver trim - Model A is backordered and will ship as soon as it is back in stock.
Swap the failing multifunction steering wheel modules on your Audi A4, S4, or RS4 B9 (2016–2024) with these complete replacement units that deliver new switch electronics, scroll wheels, button surfaces, and plug-in connectors in a single bolt-on assembly.
The B9 A4 moved more driver controls onto the steering wheel than any Audi before it. Virtual Cockpit navigation, adaptive cruise distance, speed limiter, phone and media, voice input, and trip computer are all managed from the spokes. That concentration of function means the button modules absorb an enormous amount of daily input, and after eight years on the market, B9s across the board are showing the consequences — unresponsive switches, erratic scroll behaviour, and surfaces worn beyond recognition.
This kit replaces every component responsible for those failures.
Looking to upgrade the interior of your car? Also visit the Audi section of our aftermarket parts shop.
Compatible Audi Models
Audi A4 Sedan (B9) – 2016 to 2024
Audi A4 Avant (B9) – 2016 to 2024
Audi A4 Allroad (B9) – 2016 to 2024
Audi S4 (B9) – 2016 to 2024
Audi RS4 Avant (B9) – 2017 to 2024
Fits both pre-facelift (2016–2019) and facelift (2020–2024) models across sedan, Avant, and Allroad body styles. The B9 steering wheel switch module is shared across the A4 range regardless of powertrain. Compare the product images to your steering wheel configuration before ordering, as module layouts may differ between standard multifunction and S line / RS flat-bottom steering wheels.
The Problem With Replacing Just the Caps
Most steering wheel button kits on the market only replace the outer cosmetic caps. That fixes the visual wear — the glossy surfaces, the faded icons, the flattened scroll wheel texture — but it leaves the failing electronics underneath exactly as they were.
On the B9 A4, the electrical failures are often worse than the cosmetic ones. Dome switches lose their defined click and start requiring multiple presses to register a single input. Scroll wheel encoders develop dead zones where rotation produces no response, then suddenly jump two or three menu positions at once. The cruise control rocker becomes unreliable at the exact moment the driver needs it to respond instantly.
Fitting new caps over dead electronics is a repair that looks right but does not work right. This kit replaces the entire module — surface and circuitry together — so nothing is left behind to fail.
The Daily Driver Factor
The A4 is the highest-volume B9 in the Audi range. Most examples serve as daily commuters, covering motorway runs, urban stop-start traffic, and school runs in equal measure. That usage profile generates a relentless accumulation of button presses and scroll inputs — far more per year than a weekend car or a second vehicle ever would.
Cruise control activation on every motorway merge. Volume adjustment at every traffic light. Phone pickup and hangup through the day. Virtual Cockpit scrolling to check range, consumption, and navigation. Each interaction is small, but the aggregate over 50,000 to 150,000 kilometres of daily driving exhausts the switch contacts well within the car's mechanical lifespan.
The A4's buttons do not fail because of a defect. They fail because the car is used exactly the way it was designed to be used — constantly.
What You Receive
Each replacement is a complete steering wheel switch module containing:
Fresh button caps and rocker surfaces with factory-grade satin coating and sharp icon definition
New dome switch contacts with full tactile click response on every activation
New scroll wheel assembly with precise detent steps and restored knurled grip
Integrated plug connector that mates directly with the B9 steering wheel harness
This is the full electrical and mechanical assembly — not a cosmetic cap set. It mounts onto the steering wheel spoke as a single unit and is ready to use the moment it is plugged in.
Installation
The factory switch module clips onto the steering wheel spoke and connects through a single harness plug.
Unclip the old module from the spoke. Disconnect the wiring connector by pressing the release tab and pulling straight back. Set the old unit aside.
Plug the new module's connector into the harness. Press the module onto the spoke until all retention clips lock.
No airbag removal. No steering wheel extraction. No VCDS coding, no adaptation reset, and no dealer visit.
Both modules swap in approximately 15 to 20 minutes.
Why This Kit Is Worth It
Full module replacement for the Audi A4, S4, and RS4 (B9) — sedan, Avant, and Allroad
Solves electrical and cosmetic failures simultaneously — no need for a separate cap kit
Eliminates scroll wheel dead zones and unresponsive button presses at the source
Plug-and-play harness connector with no rewiring or signal adaptation
No airbag intervention, no coding, and no specialist tools
A fraction of the cost of the same repair through an Audi dealership
Explore all parts and accessories for Audi, browse our full range of replacement interior buttons and controls, and discover more in our interior trims collection.

About Euro Premium Parts
Welcome to Euro Premium Parts, your trusted source for high-quality accessories and upgrades for BMW, Audi, Volkswagen, and Mercedes-Benz.
We started this store out of a genuine passion for European cars and a simple goal: make it easier for enthusiasts to find reliable, plug-and-play parts that fit perfectly and offer great value for money.
Our Mission
Our mission is to simplify the way you enhance your car.
Every product in our catalog is carefully preselected for its quality, fitment, and overall reliability, so you don’t have to waste time searching through endless listings.
All our items are plug & play, easy to install, and backed by a 1-year warranty.
And because great service shouldn’t come with extra fees, shipping is always free.
A Team of Car Lovers You Can Rely On
Euro Premium Parts is built and managed by car enthusiasts who understand what drivers expect when upgrading their vehicles.
We know how frustrating it can be to deal with compatibility or installation issues, which is why our support team is available to help every step of the way.
Our goal is to make each purchase smooth, transparent, and worry-free.
Why Drivers Choose Us
- Products chosen for quality and compatibility
- Free shipping on all orders
- 1-year warranty on every product
- Helpful and responsive customer support
- Straightforward, plug & play installation
There are plenty of online stores selling car parts, but few focus on reliability, compatibility, and customer service the way we do.
Built Around Passion and Trust
Whether you drive a sporty coupe, a luxury sedan, or a modern SUV, our catalog is designed to help you customize and enhance your car with confidence.
We’re constantly updating our selection based on what our customers want most, staying true to our commitment to quality and simplicity.
Your Partner in Automotive Style and Performance
When you shop at Euro Premium Parts, you’re choosing more than just products — you’re choosing a team that values quality, reliability, and honest service.
Every order is handled with care, and every customer matters.
Upgrade with confidence. Drive with pride.
Euro Premium Parts — European excellence, delivered.








