The Mercedes-Benz M266 is the inline-four gasoline engine developed for the second-generation A-Class and the first B-Class. It is an evolution of the M166 used in the original A-Class, and it keeps that engine's compact, packaging-driven design: a transversely mounted, steeply inclined four-cylinder with a single overhead camshaft, two valves per cylinder, a timing chain and multipoint port fuel injection. It was offered in 1.5-, 1.7- and 2.0-liter naturally aspirated forms and as a 2.0-liter turbo in the A 200 Turbo and B 200 Turbo.
The M266 powers the gasoline versions of the A-Class W169 and the B-Class W245, two cars that are now very affordable on the used market. For buyers, that makes the M266 important: it is a simple, port-injected engine with no direct-injection carbon issues and no complex high-pressure fuel system, which keeps running costs low. Its weaknesses are mostly ancillary and age-related rather than fundamental.
Which version you choose still matters. The 1.5-liter is adequate in town but strained on the highway, the 1.7 and 2.0 are better all-rounders, and the turbocharged 2.0 transforms the car's performance but adds a turbocharger, intercooler and more heat to an already tightly packaged engine bay. Many cars also have the optional Autotronic CVT, which has its own reliability profile.
Parts & Accessories
Your Mercedes deserves better.
Hand-picked performance and replacement parts — ready to ship.
Shop Mercedes parts →Specs & Versions
Base Specifications
| Spec | Detail |
|---|---|
| Type | Inline-4, transverse, naturally aspirated or turbocharged |
| Displacement | 1,498 cc / 1,699 cc / 2,034 cc |
| Block | Aluminum alloy |
| Head | Aluminum |
| Valvetrain | SOHC, 2 valves per cylinder (8 valves), timing chain |
| Injection | Multipoint port fuel injection |
| Aspiration | Naturally aspirated; turbocharged with intercooler on 200 Turbo |
| Bore x Stroke | 83.0 mm x 69.2 mm (1.5) / 83.0 mm x 78.5 mm (1.7) / 83.0 mm x 94.0 mm (2.0) |
| Firing Order | 1-3-4-2 |
| Production Years | 2004–2012 |
Naturally Aspirated Versions (2004–2012)
The naturally aspirated M266 engines share the same 83 mm bore and differ in stroke. In the A-Class W169, they were badged A 150, A 170 and A 200; in the B-Class W245, B 150, B 170 and B 200. Badging and availability varied by market and model year, especially after the 2008 facelift, so always check the engine output on the registration documents rather than relying on the badge. The years below refer to the model range.
M266 E15 — 95 hp / 103 lb-ft
| Model | Chassis | Years |
|---|---|---|
| Mercedes-Benz A 150 | W169 | 2004–2012 |
| Mercedes-Benz B 150 | W245 | 2005–2011 |
M266 E17 — 116 hp / 114 lb-ft
| Model | Chassis | Years |
|---|---|---|
| Mercedes-Benz A 170 | W169 | 2004–2012 |
| Mercedes-Benz B 170 | W245 | 2005–2011 |
M266 E20 — 136 hp / 136 lb-ft
| Model | Chassis | Years |
|---|---|---|
| Mercedes-Benz A 200 | W169 | 2004–2012 |
| Mercedes-Benz B 200 | W245 | 2005–2011 |
Turbocharged Version (2005–2012)
The 2.0-liter turbo adds a turbocharger and intercooler, giving the small Mercedes hatchback and MPV genuinely brisk performance. It is the most enjoyable M266, but also the one that needs the most careful maintenance.
M266 E20 Turbo — 193 hp / 207 lb-ft
| Model | Chassis | Years |
|---|---|---|
| Mercedes-Benz A 200 Turbo | W169 | 2005–2012 |
| Mercedes-Benz B 200 Turbo | W245 | 2005–2011 |
How to Check a Used M266-Powered Car's History
Most M266-powered cars are now well over a decade old, and many have passed through several owners who treated them as cheap transport. That makes the service history more important than the mileage. Look for regular oil changes with the correct Mercedes-approved oil, evidence that the thermostat, engine mounts and coolant have been looked after, and, on Autotronic CVT cars, proof of transmission fluid changes. For the 200 Turbo, check for signs of hard driving, unapproved tuning or a replaced turbocharger.
Inexpensive cars also attract odometer fraud and poorly repaired accident damage. Compare recorded mileage across inspections and services, look for inconsistent panel gaps or repainted parts at the front, and have a specialist check the fault memory, especially for cooling system and transmission codes, before you hand over any money. During the test drive, start the engine from cold, listen for any rattle in the first seconds, watch that the temperature gauge rises normally, and check for vibration at idle with the air conditioning switched on, which quickly reveals tired engine mounts.
Get an instant 20% discount to access a vehicle's full past with total transparency via carVertical by clicking this link or on the banner below:
Key Strengths
The M266's biggest advantage is its simplicity. With port fuel injection, a single overhead camshaft and two valves per cylinder, there is no high-pressure fuel pump to fail, no intake-valve carbon buildup typical of early direct-injection engines and relatively few expensive electronic components. The naturally aspirated versions in particular are mechanically conservative and tolerant of less-than-perfect maintenance.
The engine is also economical and easy to live with. Fuel consumption is reasonable, parts are inexpensive and widely available, and most routine service items such as spark plugs, filters and ignition components are straightforward to replace. The timing chain generally lasts a long time when oil changes are done on schedule. Because the engine has no variable valve lift, no high-pressure pump and, on most versions, no turbocharger, there are simply fewer expensive parts that can fail as the car ages. That matters on a car whose market value is now modest: a typical repair on an M266 is a gasket, a thermostat or a mount, not a four-figure fuel-system or turbo bill. Independent garages can work on it with standard tools and a basic Mercedes-capable diagnostic system.
Finally, the 200 Turbo gives the range a genuinely quick option. Its torque arrives early, it makes the B-Class a surprisingly fast family car, and it responds well to modest software tuning. Compared with the earlier M166 in the A-Class W168, the M266 is smoother, stronger and more refined across the board.
Known Reliability Issues
Engine Mount Wear
Symptom: Strong vibration at idle, especially in drive or with the air conditioning on, clunks when pulling away or lifting off the throttle.
Cause: The engine mounts and torque support carry a steeply inclined engine in a compact subframe and degrade with age and heat.
Severity: Low to moderate. Mostly a comfort issue, but badly worn mounts stress exhaust components and hoses.
Typical Mileage: Around 62,000–93,000 miles (100,000–150,000 km) or 10+ years.
Note: Replacement parts are inexpensive; quality aftermarket or OEM mounts restore refinement.
Thermostat and Cooling System Faults
Symptom: Temperature gauge slow to rise or reading low, poor cabin heating, coolant leaks around the thermostat housing, fault code P0128 (coolant temperature below thermostat regulating temperature).
Cause: Thermostats can stick open with age, and plastic housings, hoses and connectors become brittle.
Severity: Moderate. A stuck-open thermostat raises fuel consumption and wear; a leak can lead to overheating if ignored.
Typical Mileage: Often from around 62,000 miles (100,000 km).
Note: Replace the thermostat and coolant together, and inspect all hoses at the same time.
Oil Leaks
Symptom: Oil residue around the valve cover, timing cover area or oil filter housing, burning-oil smell when hot, spots under the car.
Cause: Aging gaskets and seals. The engine's inclined position and tight packaging allow leaks to drip onto hot exhaust parts.
Severity: Low to moderate. Usually inexpensive gasket jobs, but access can add labor time.
Typical Mileage: From around 75,000 miles (120,000 km).
Note: Fix leaks early to avoid oil contaminating engine mounts and wiring.
Rough Idle and Throttle Body Contamination
Symptom: Unstable or hunting idle, stalling when coming to a stop, hesitation on light throttle.
Cause: Deposits on the electronic throttle body, vacuum leaks from aging hoses, or worn spark plugs and ignition components.
Severity: Low. Usually fixed with cleaning, an adaptation reset and fresh ignition parts.
Typical Mileage: Any age; more common on cars used mostly for short trips.
Note: After cleaning the throttle body, perform an adaptation with a suitable diagnostic tool.
Turbo, Boost Hoses and Intercooler (200 Turbo)
Symptom: Loss of power, whistling or hissing under boost, limp mode, smoke from the exhaust.
Cause: Split boost hoses, worn turbo bearings from oil neglect, or leaking intercooler connections.
Severity: Moderate. Hoses are cheap; a replacement turbo is a significant expense relative to the car's value.
Typical Mileage: From around 75,000 miles (120,000 km), earlier on poorly maintained or tuned cars.
Note: Let the engine idle briefly after hard driving and keep oil changes frequent.
Autotronic CVT Problems
Symptom: Juddering when pulling away, whining, slipping or flare under acceleration, transmission warning lights.
Cause: Not an engine fault, but many M266 cars use the Autotronic continuously variable transmission. Old fluid, wear and electronic faults are the main issues.
Severity: Moderate to high. Fluid services are affordable, but major repairs can exceed the value of an older A- or B-Class.
Typical Mileage: Variable; poorly maintained units can show problems from around 62,000 miles (100,000 km).
Note: Test-drive from cold and check for smooth take-off; if in doubt, choose a manual car.
Maintenance Schedule
| Service | Interval |
|---|---|
| Engine oil and filter | Every 9,500 miles (15,000 km) or annually (6,000 miles (10,000 km) recommended for the 200 Turbo) |
| Spark plugs | Per service booklet; around 37,000 miles (60,000 km) is a sensible target |
| Air filter | Every 25,000–37,000 miles (40,000–60,000 km) |
| Fuel filter | Per service booklet |
| Coolant and thermostat check | Check annually; replace coolant per service booklet or at any thermostat replacement |
| Brake fluid | Every 2 years |
| Autotronic CVT fluid | Around 37,000 miles (60,000 km) recommended by specialists |
| Auxiliary drive belt and engine mounts | Inspect at every service |
Recommended oil specification: Use an oil approved to MB 229.3 or MB 229.5 in the viscosity specified in the owner's documentation (typically 5W-30 or 5W-40). A fully synthetic MB 229.5 oil is the best choice for the 200 Turbo.
Tuning Potential
The naturally aspirated M266 engines offer little meaningful tuning potential. Software alone typically adds only a few horsepower, and intake or exhaust changes mainly affect sound. The 2.0 Turbo is a different story: like most factory turbo engines, it responds well to an ECU remap that raises boost and adjusts ignition timing, delivering a noticeable gain in mid-range torque.
| Stage | Modifications | Estimated Power |
|---|---|---|
| NA versions | ECU remap, air filter | Small gains, typically under 10 hp |
| Turbo Stage 1 | ECU remap on stock hardware | Around 215–230 hp |
| Turbo Stage 2 | Stage 1 plus improved intercooler, intake and exhaust | Around 230–245 hp |
Recommended first modifications in priority order:
- Bring maintenance up to date: spark plugs, coils, thermostat and fresh oil
- Replace any cracked boost hoses (200 Turbo)
- Quality ECU remap from a specialist with Mercedes experience
- Uprated intercooler for repeated hard driving
- Uprated engine mounts to control engine movement
The transmission is the main constraint. The Autotronic CVT in particular has limited torque capacity, so tuned automatic cars should stay conservative. Use high-octane fuel, keep the cooling system in perfect condition, and remember that removing catalytic converters is illegal on public roads in the EU and US. On the 200 Turbo, more boost means more heat under a short, crowded hood, so charge-air temperatures, coolant temperature and oil condition deserve close attention after any tune. Shorter oil change intervals, a healthy thermostat and intact boost hoses do more for the long-term health of a tuned M266 than any additional hardware. For the naturally aspirated engines, money is usually better spent on suspension, brakes and tires than on chasing a handful of extra horsepower.
FAQ
Is the Mercedes-Benz M266 reliable?
Yes. The M266 is generally considered a dependable, simple engine. Most issues involve age-related parts such as mounts, thermostats and gaskets, while the core engine is durable when serviced properly.
What are the most common M266 problems?
Worn engine mounts, thermostat and coolant leaks, oil leaks, rough idle from throttle body contamination, boost hose or turbo issues on the 200 Turbo, and, on the drivetrain side, Autotronic CVT problems.
How long does the M266 last?
Well-maintained examples regularly exceed 155,000 miles (250,000 km). The naturally aspirated versions in particular are long-lived when oil changes are kept on schedule.
How does the M266 compare with the M270 that replaced it?
The M270 in the A-Class W176 is a modern turbocharged direct-injection engine with more power and better efficiency, but it is also more complex. The M266 is slower and less efficient, yet simpler and cheaper to maintain.
How much power can the M266 make?
The naturally aspirated versions gain very little from tuning. The 2.0 Turbo can reach around 215–230 hp with software alone and a little more with supporting modifications.
Is a tuned A 200 Turbo or B 200 Turbo good for daily driving?
Yes, a quality Stage 1 tune keeps the car civil and reliable as long as maintenance is thorough. Be more cautious with CVT-equipped cars because of the transmission's torque limits.
Conclusion
The M266 is an honest, straightforward engine that suits the practical A-Class and B-Class well. It avoids the complexity of later direct-injection turbo engines, and its weak points are mostly inexpensive, age-related components rather than serious design flaws. Choose a car with a solid service history, check the mounts, cooling system and transmission carefully, and an M266-powered Mercedes can be a cheap and dependable everyday car for years to come.
Overall Reliability Score: 7.5/10
Tuning Score: 4/10
Keep your A-Class or B-Class running smoothly with quality maintenance and replacement parts. Browse our range of Mercedes-Benz parts to find the right components for your M266.




