Silicone Kawasaki Motorcycle Key Case – Protective Key Fob Cover For Ninja ZX Z800 Z900 Versys

Six World Superbike Championship titles. Back to back to back — six consecutive years of Jonathan Rea and the Ninja ZX-10R crossing the line first. No other brand in modern WSBK history comes close. When Kawasaki competes, it dominates. The green doesn't finish second.

That same relentless standard applies to what you carry in your pocket. This Silicone Kawasaki Motorcycle Key Case protects your Kawasaki key from drops, scratches, rain, and the punishment of daily riding — with a grip-enhancing, shock-absorbing cover that fits correctly, works in all conditions, and never gets in the way.

Built for What Kawasaki Riders Put Their Equipment Through

Kawasaki owners don't treat their bikes gently. The Ninja ZX-10R was bred for circuits. The H2 is supercharged. The Z900 is tuned for aggression. The Versys 1000 has covered more distance than most bikes ever see. Equipment attached to these machines has to perform at the same level.

• Impact-absorbing silicone — drops on circuit paddock tarmac, garage floors, and gravel car parks are absorbed before reaching the factory key casing
• Wet weather resistant — seals out rain during open-road riding and paddock conditions
• Vibration-stable grip — the textured surface locks into a gloved hand at every fuel stop, no fumbling
• Temperature resilient — functional from cold early-morning track days to mid-summer canyon runs
• Scratch and friction resistant — eliminates the surface wear that accumulates in toolkit bags, jacket pockets, and pit bags

All Key Functions Fully Operational

• Ignition key and all remote buttons respond cleanly through the silicone
• Kawasaki Rideology app key and keyless ignition functions (select models) pass through without signal loss
• Fully RF-transparent material — zero interference with proximity or remote start systems
• Emergency blade access remains available at all times
• Glove-compatible texture — the honeycomb pattern provides enough grip to operate without removing riding gloves

Compatible Key Types

This Kawasaki motorcycle silicone key cover is available in two variants to match the key designs used across Kawasaki's current and recent motorcycle range. Compare your key to the product images before ordering.

Type A — Kawasaki Standard Key Head Cover (Ninja, Z & Versys range) Silicone cover for Kawasaki's standard ignition key with moulded plastic head — the key type used across the Ninja and Z naked range. Protects the key head from cracking, scratching, and wear without affecting ignition operation. Fits: Ninja ZX-6R | Ninja ZX-10R / ZX-10RR | Ninja ZX-14R | Ninja 400 | Ninja 650 | Ninja 1000SX | Z400 | Z650 | Z900 / Z900RS | Z1000 / Z1000SX | Versys 650 / 650 LT | Versys 1000 / 1000 SE | Versys-X 300 | W800 | Vulcan S | KLX 300 / 400

Type B — Kawasaki Smart Key Fob (keyless ignition models) Separate key fob for models equipped with Kawasaki's keyless ride system. Covers the fob without interfering with proximity ignition detection or electronic functions. Fits: Ninja H2 / H2 Carbon | Ninja H2 SX / SX SE | Ninja ZX-10R (2021+, keyless variant) | Concours 14 (select markets, keyless variant)

Kawasaki key designs may vary by model year, trim level, and market. Always compare your key to the product images before ordering. Send us a photo if you need confirmation.

Team Green, All the Way to the Key

The Kawasaki Ninja ZX-10R that Jonathan Rea rode to six consecutive World Superbike titles wasn't stock — but it started with the same DNA as the one in your garage. Kawasaki's "Team Green" philosophy runs through every model: build it right, make it fast, make it last.

The honeycomb-textured silicone surface isn't decorative — it's functional. It gives genuine grip in waterproof winter gloves. It adds a tactile layer to a slick factory key head. It makes the key noticeably more secure to handle in every condition you actually ride in.

Available in Kawasaki Green — and More

Choose from a range of colours — including Kawasaki lime green that suits the Team Green heritage directly, matte black for a stealthy finish, and other tones to personalise your keyring or match your bike's livery. The silicone resists UV fading through all-season outdoor exposure, including summer circuit days.

Installed Before the Warm-Up Lap

Press your Kawasaki key into the silicone cover until it seats fully around the key head or fob. The cover stays in place through vibration, high-speed riding, and constant in-and-out of pockets. Remove it in seconds when battery access is needed. No tools, no adhesive, no modification.

Why Choose This Silicone Kawasaki Key Case?

Frequently Asked Questions

Does this fit the Ninja ZX-10R and ZX-6R? Yes. Type A covers the standard Kawasaki key head used across the full Ninja range, Z naked bikes, and Versys touring models. The cover fits over the plastic key head and protects it from cracking and surface damage.

Does Type B work with the H2's keyless ignition? Yes. The silicone is fully RF-transparent. Proximity detection and all keyless ignition functions work normally through the cover with no signal degradation or range reduction.

Will it hold during hard acceleration or track use? Yes. The silicone fits closely around the key profile and does not shift from vibration, hard acceleration, or high-speed conditions. It is built to stay in position whether on the ignition, in a jacket pocket, or in a pit bag.

Is it compatible with the Kawasaki Rideology app connection? The Rideology app connects via Bluetooth to the bike's ECU, not through the key itself — so the cover has no impact on Rideology connectivity whatsoever.

Every order includes Free Shipping and is backed by our 1-Year Warranty.

About Euro Premium Parts

Welcome to Euro Premium Parts, your trusted source for high-quality accessories and upgrades for BMW, Audi, Volkswagen, and Mercedes-Benz.

We started this store out of a genuine passion for European cars and a simple goal: make it easier for enthusiasts to find reliable, plug-and-play parts that fit perfectly and offer great value for money.

Our Mission

Our mission is to simplify the way you enhance your car.
Every product in our catalog is carefully preselected for its quality, fitment, and overall reliability, so you don’t have to waste time searching through endless listings.
All our items are plug & play, easy to install, and backed by a 1-year warranty.
And because great service shouldn’t come with extra fees, shipping is always free.

A Team of Car Lovers You Can Rely On

Euro Premium Parts is built and managed by car enthusiasts who understand what drivers expect when upgrading their vehicles.
We know how frustrating it can be to deal with compatibility or installation issues, which is why our support team is available to help every step of the way.
Our goal is to make each purchase smooth, transparent, and worry-free.

Why Drivers Choose Us

- Products chosen for quality and compatibility

- Free shipping on all orders

- 1-year warranty on every product

- Helpful and responsive customer support

- Straightforward, plug & play installation

There are plenty of online stores selling car parts, but few focus on reliability, compatibility, and customer service the way we do.

Built Around Passion and Trust

Whether you drive a sporty coupe, a luxury sedan, or a modern SUV, our catalog is designed to help you customize and enhance your car with confidence.
We’re constantly updating our selection based on what our customers want most, staying true to our commitment to quality and simplicity.

Your Partner in Automotive Style and Performance

When you shop at Euro Premium Parts, you’re choosing more than just products — you’re choosing a team that values quality, reliability, and honest service.
Every order is handled with care, and every customer matters.

Upgrade with confidence. Drive with pride.
Euro Premium Parts — European excellence, delivered.