Lock/Unlock & Warning Replacement Buttons For BMW 7 Series F01 - 2008 – Euro Premium Parts
FREE SHIPPING ON ALL ORDERS - 1 YEAR WARRANTY

Lock/Unlock & Warning Replacement Buttons For BMW 7 Series F01 - 2008 to 2018

£2257
Tax included Shipping calculated at checkout.

Set
  • American Express
  • Apple Pay
  • BLIK
  • Cartes Bancaires
  • Klarna
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Secure checkout
Your payment information is SSL-encrypted and never stored. Shop with confidence.
Packaged with care
Every order is securely packaged to make sure your parts arrive exactly as expected — no damage, no surprises.
Order with confidence
Your purchase is risk-free. If the part doesn't work for you, send it back within 30 days — we'll take care of the rest.
Real people, real answers
Every order is reviewed by our team. If you have any doubt about compatibility, installation, or anything else — we're one message away.
  • Description
  • About us

Restore the flagship standard of your BMW 7 Series F01 with replacement lock/unlock and hazard warning buttons.

The 7 Series F01 sets the benchmark for BMW interiors — every surface, every control is held to a standard that lesser models do not reach. That makes a degraded button more conspicuous here than anywhere else in the BMW lineup. When the soft-touch coating turns sticky and the legends fade, it is immediately apparent in a cabin where passengers and drivers alike expect nothing to be out of place. These plug-and-play replacements restore the control surfaces to factory specification without any coding, wiring, or panel removal.

Looking to upgrade the interior of your 7 Series? Also visit the BMW section of our aftermarket parts shop.

Compatible with all the following models:

- 2008 BMW 7 Series F01 / F02

- 2009 BMW 7 Series F01 / F02

- 2010 BMW 7 Series F01 / F02

- 2011 BMW 7 Series F01 / F02

- 2012 BMW 7 Series F01 / F02

- 2013 BMW 7 Series F01 / F02

- 2014 BMW 7 Series F01 / F02

- 2015 BMW 7 Series F01 / F02

DIY-Install

The F01 features more buttons per cabin than most BMWs — a consequence of its full luxury specification. Each one uses the same soft-touch rubber coating that degrades with age, heat, and accumulated hand contact. Once the coating breaks down it becomes sticky, leaves residue, and eventually peels. On a flagship sedan where occupants sit in close proximity to these controls, a single failed button is impossible to ignore.

Despite the F01's complexity elsewhere, replacing these buttons is straightforward — no door card removal, no harness work, no coding required.


Tools Needed

- Plastic trim removal tool

- No other tools required


Step 1 – Locate the Button

Identify which button you are replacing:

- Lock / Unlock buttons — located on the door panel switch cluster

- Hazard warning button — located on the center console, marked with a red triangle symbol


Step 2 – Remove the Old Button

Insert a plastic trim tool at the edge of the button or switch surround.

Apply gentle lever pressure at multiple points to release the retaining clips evenly.

Pull the button unit forward — F01 buttons are held by clips only, with no screws.

Press the release tab on the wiring connector and pull straight back to unplug.


Step 3 – Install the New Button

Connect the wiring connector to the back of the new button until it clicks securely.

Align the unit with its housing recess.

Press firmly and evenly around the surround until every clip engages and the button sits perfectly flush.


Estimated Time

5 to 10 minutes per button


Final Result

Replacing these buttons gives you:

- Clean surface with no sticky residue transfer

- Crisp, legible symbols restored

- Positive, precise click action

- Interior control quality consistent with the 7 Series standard


Vehicle Compatibility

Fits:

- BMW 7 Series Sedan (F01) — 2008 to 2015

- BMW 7 Series Long Wheelbase (F02) — 2008 to 2015


Pro Tip

With the button out, take a moment to:

- Clean the housing recess thoroughly — coating residue accumulates in the gap over time

- Inspect connector pins for any sign of corrosion

- Check every other soft-touch button in the cabin — the F01 has many, and coating failure rarely stops at one

Perfect Fit and Finish

Produced to the exact dimensional specification of the original F01 components, these buttons use the correct connector pinout, clip pattern, and button travel. On a flagship interior where tolerances and alignment are immediately noticeable, the fit is flush and precise — consistent with the surrounding trim and with no perceptible gap or movement.

Durable Construction

Built from quality ABS with a surface finish that holds up under the sustained daily use the F01's buttons receive. Legends remain sharp and readable, and the surface stays clean to the touch — the standard the 7 Series interior demands.

No Coding Required

A direct plug-and-play replacement with an identical connector to the factory unit. Unplug the old button, plug in the new one. No BMW diagnostic software, no dealer coding session, no additional steps.

Cost-Effective Solution

Maintaining a flagship interior does not require flagship repair bills. A sticky or illegible button is a cosmetic issue with a five-minute fix — these replacements restore the quality of the controls your hands use every day at a fraction of what a dealer would charge for the same result.

We also recommend our LED Dynamic turn signals to complete the look. Upgrade your car's interior today!

Available colors:

- Black

- Beige

- Oyster

- Everest Gray

- Cinnamon Brown

- Amaro Brown

- Mocha Brown

About Euro Premium Parts

Welcome to Euro Premium Parts, your trusted source for high-quality accessories and upgrades for BMW, Audi, Volkswagen, and Mercedes-Benz.

We started this store out of a genuine passion for European cars and a simple goal: make it easier for enthusiasts to find reliable, plug-and-play parts that fit perfectly and offer great value for money.


Our Mission

Our mission is to simplify the way you enhance your car.
Every product in our catalog is carefully preselected for its quality, fitment, and overall reliability, so you don’t have to waste time searching through endless listings.
All our items are plug & play, easy to install, and backed by a 1-year warranty.
And because great service shouldn’t come with extra fees, shipping is always free.



A Team of Car Lovers You Can Rely On

Euro Premium Parts is built and managed by car enthusiasts who understand what drivers expect when upgrading their vehicles.
We know how frustrating it can be to deal with compatibility or installation issues, which is why our support team is available to help every step of the way.
Our goal is to make each purchase smooth, transparent, and worry-free.

 


Why Drivers Choose Us

- Products chosen for quality and compatibility

- Free shipping on all orders

- 1-year warranty on every product

- Helpful and responsive customer support

- Straightforward, plug & play installation

There are plenty of online stores selling car parts, but few focus on reliability, compatibility, and customer service the way we do.

 


Built Around Passion and Trust

Whether you drive a sporty coupe, a luxury sedan, or a modern SUV, our catalog is designed to help you customize and enhance your car with confidence.
We’re constantly updating our selection based on what our customers want most, staying true to our commitment to quality and simplicity.

 


Your Partner in Automotive Style and Performance

When you shop at Euro Premium Parts, you’re choosing more than just products — you’re choosing a team that values quality, reliability, and honest service.
Every order is handled with care, and every customer matters.

Upgrade with confidence. Drive with pride.
Euro Premium Parts — European excellence, delivered.

Frequently Asked Questions

SHIPPING

How long does delivery take?

Most orders ship within 24–48 hours. Delivery times generally range from 5 to 10 business days depending on your location and the product ordered.

How much is the shipping?

Shipping is completely free for all orders, without minimum order amount.

INSTALLATION

Are your products compatible with my vehicle?

Each product page includes a detailed compatibility section. If you’re unsure whether the item fits your exact model/year, just contact us with your VIN or car details — we’ll be happy to confirm before you order.

Can I install the product myself?

Most of our accessories are designed for easy plug-and-play or bolt-on installation. We also provide DIY tutorials and support if needed. For some products like spoilers or carbon trims, professional installation is recommended.

RETURNS AND REFUNDS

Do you provide customer support after purchase?

Yes! Our customer support team is available to help with compatibility questions, installation advice, or any issue that may arise after your order.


Is there a warranty on the products?

Absolutely — every product is covered by a 1-year warranty against defects. If you experience any issue, we’re here to help.

What if the item doesn’t fit or I change my mind?

No stress — we offer a 30-day return policy from the day you receive your item. Just contact us and we’ll guide you through the process.