Radio MMI Surround Trim Replacement Kit for Audi A4 S4 RS4 B8 - 2007 to 2015

Your Audi A4 B8 Still Drives Like New — Make the Interior Match

The Audi A4 B8 was built to last. Plenty of them are still on the road today in excellent mechanical condition, with interiors that tell the story of every kilometre. The MMI surround trim is usually the first thing to show it: gloss surface scratched from daily contact, edges lifting, clip points stressed from years of vibration.

A car that runs this well shouldn't be let down by a worn bezel. This Radio MMI Surround Trim Replacement Kit for Audi A4 S4 RS4 B8 (2007–2015) restores the centerpiece of your dashboard to factory condition — cleanly, quickly, and without touching anything else.

Kit Specifications

Why B8 Trim Wears — and Why It Matters More on an Older Car

The A4 B8 was produced from 2007 to 2015, which means the earliest cars are now approaching two decades on the road. The factory gloss black MMI surround was never designed to handle that kind of time — it accumulates micro-scratches from every interaction, stress-cracks at the mounting clips from years of temperature cycles, and eventually starts to lift at the edges.

On a well-maintained B8 with fresh paintwork and a clean engine bay, a cracked or heavily scratched MMI bezel is jarring. It signals neglect where there isn't any. This kit removes that signal — with a factory-fit replacement that brings the interior in line with the rest of the car.

Covers the Full B8 Lineup

• Audi A4 B8 — Sedan and Avant, all engines, 2007 to 2015
• Audi S4 B8 — V6 supercharged (2008–2012) and V6 TFSI (2012–2015)
• Audi RS4 B8 — V8 4.2 FSI Avant and Sedan, 2012 to 2015
• Compatible with both pre-facelift (2007–2011) and facelift (2012–2015) center stack layouts

To confirm fitment: the B8 center stack should show the radio / MMI display set into a gloss black surround bezel integrated into the dashboard. If that bezel is damaged, this kit replaces it directly.

Five-Minute Clip-On Fit — No Workshop Needed

The replacement uses the original B8 clip mounting system — no adhesive, no modification, no risk to surrounding panels. The worn trim lifts off carefully from the edges; the new piece presses in flush with a firm, rattle-free seat. The OEM-matched piano black finish integrates cleanly with adjacent dashboard elements. Fully reversible, zero permanent change to the vehicle.

Complete Your B8 Interior Restoration

On a B8 this age, the MMI surround rarely goes alone. If your AC buttons, armrest, or door panel inserts are also worn, our Audi A4 B8 interior accessories range covers those too. We also carry kits for the Audi A6 C6, A3 8V, and Q5 8R if you're working through a fleet or multiple cars.

Frequently Asked Questions

Does this fit both the A4 B8 Sedan and Avant?

Yes. The Audi A4 B8 Sedan and Avant (Estate) share the same dashboard center stack. One kit fits both body styles across all engine and trim variants.

Is the facelift B8 (2012–2015) the same panel as the pre-facelift?

The 2012 B8 facelift updated several exterior and interior details, but the MMI surround trim format in the center stack remained the same. This kit is confirmed compatible with both generations.

Will it match the RS4 B8's interior, which has different trim options?

Yes. The RS4 B8 uses the same MMI center stack surround as the A4 and S4 B8 regardless of interior trim selection (Fine Nappa, Alcantara, carbon inlays). The bezel itself is identical across variants.

The trim on my car is not cracked — just covered in fine scratches. Is replacement worth it?

On gloss black ABS, fine scratches cannot be polished out without removing the surface layer. Compound and detailing products reduce the appearance temporarily but do not restore the original finish. Replacement is the only clean result, and at clip-on fitment it costs less time than a detailing session.

Can I install this myself without removing the dashboard?

Yes. The MMI surround clips onto the center stack from the front — no dashboard removal, no panel disassembly behind it. The worn piece releases from the edges, and the replacement clips straight in.